English  |
Product Description
UQK-652-C/S Marine Float Level Controller
Product Introduction:
The Marine UQK-652-C/S Float Level Controller is a versatile, top-mounted liquid level control device engineered for Multi-Point Level Control Or Alarm For The Medium and alarming in marine tanks and compartments. It is specifically designed for shipboard applications including fuel oil tanks, lubricating oil sumps, fresh water tanks, ballast tanks, bilge wells, and sewage holding tanks. The controller operates on a simple magnetic float principle. As the liquid level rises or falls, a sealed hollow float moves vertically along a guide rod. A permanent magnet embedded in the float actuates a hermetically sealed reed switch inside the stem without any physical contact. This non-contact design ensures long service life and eliminates mechanical wear.
Main Technical Specification:
| L Control range | 60~3000mm |
| L₁ Lower dead zone | 50mm |
| L₂ Upper dead zone | ≤40mm |
| Float dia.D | Φ28 Φ45 Φ52 Φ60mm |
| Protected pipe dia. | Φ60 Φ76mm |
| Working temp. | ≤100℃ |
| Nominal pressure PN | 1.0MPa |
| Medium gravity | ≥0.80 |
| Contact capacity | AC 220V 1.0A |
| Contact form | SPST SPDT |
| No.of control point | 1~3 |
| Protection | IP66/IP68 |
| Enclosure | Ex ia Ⅱ T3/T4/T5/T6Ga Exd T3/T4/T5/T6Gb |
Outline Dimension:
