Various Sizes Black Cylindrical Hollow Rubber Fender For Workboats
Deyuan Marine is producer of all types of Black Cylindrical Rubber Fender, such as cylindrical Rubber fenders and cylindrical fender bow & stern. We offer short lead times and fast delivery of various Cylindrical Rubber Fenders.
Of all the different types of Rubber Fender For Workboats profiles, Various Sizes Cylindrical Rubber Fenders have been in use for the longest period of time already. This type of fender is well capable of absorbing forces and loads. The wide choice of sizes and lengths also make them highly effective and suitable for the protection of the quays for the mooring of large and small vessels. Workboats Cylindrical Rubber Fender provide protection for embankments and they are also commonly used on the bows or sterns of tugboats and workboats.
These fenders are easy to install and maintain and they can be replaced when necessary, cause they are hollow, could be installed with a chain crossing the hollow hole and hanging on boat sides.
Deyuan Marine produces marine Cylindrical Rubber Fender with smaller diameters by means of extrusion, while larger fenders are produced by wrapping highly wear-resistant rubber around a mandrel. Cylindrical fenders are produced in different sizes, ranging from Ø 100 mm up to a diameter of 2000 mm. Standard sizes of up to a diameter of 400 mm are kept in stock by Deyuan Marine and can be delivered at short notice.
Cylindrical Rubber Fenders For Workboats can be attached to a wide variety of structures and in different manners. Installation is relatively simple and they can be mounted horizontally, vertically or diagonally using chains or rods. Black workboats Rubber Fender can be provided in specified lengths and the ends can be bevelled.
Black Cylindrical Rubber Fender For Workboats Data Sheet :
|Specification||Outer diamerter||Inner diamerter||Length||Rated compression|