Exd Oil-in-water Monitoring Device

All monitors in our range are inspected and tested to I.M.O. requirements at our factories prior to delivery.
The OCM-08G type oil-in- water monitor has been designed specifically for use in continuous monitoring of oil-in-condensate or oil-in-boiler feed water without specific environment condition, it is applicable to high water temperature.
This  Exd  Oil-in-water Monitorin g Device is suitable for application in the site where explosion preventing is required and dirty water with micro oil should be measured for discharge and control.

Type:	OCM-08G
Range:	0 –99mg/l
Accuracy	Better than 2mg/l
Linearity	better than 2 %
Display	2 digits 7 segment LED's
Power Supply:	220VAC 24 Volt AC/DC ± 10%
Consumption:	5 VA
Alarm Points:	Adjustable between 1- 30 mg/l
Alarm Points works set:	10mg/l
Alarm Indication:	Red LED's
Output Signal:	0 - 20 mA or 4 - 20 mA, reversible Ri < 500 Ω
Sample Water Pressure:	0,1 - 8bar
Sample Flow:	approx. 0,5 - 4 l/min depend. to pressure
Ambient Temperature:	- 20 to + 55° C
Sample Water Temperature:	+ 1 to + 80° C
Size (over all):	394mmW×280mmH×135mD
Degree of Protection:	IP 65
Weight	10 kg
Pipe Connections:	R 1/4" Female