EnglishEnglish

News

You are here: Home » News

Product

  • 2024-05-07

    Learn More about Anemometer AM706
    The Marine Anemometer AM706 is a combined instrument for wind speed and direction. It can measure relative wind speed (accuracy ±5%, min 0.1m/s), relative wind direction (digital display accuracy 1 °, analog display accuracy 10 ° and output accuracy ± 1 °). GYRO(HDT), SPEEDLOG(VBW) or GPS (RMC/VT
  • 2024-04-30

    2024 Labor Day Holiday Notice
    Our office will be closed during holiday of Labor Day May 1st to May 5th. We will have limited access on Email during the days. If you have urgent demand on marine equipment, life saving items, mooring equipment, rubber fenders...etc, feel free to call us pls.
  • 2024-04-25

    Learn About Tubular Type Radar Reflector
    Description:• Radar reflectors help enhance the signal of ships on the region radar.• They reflect the energy of the radar, thereby enhancing the signal of the ship. This is very useful, not only in emergency situations, but also without visibility and other nearby vessels that cannot see you.• Ligh
  • 2024-04-19

    Pneumatic Rubber Fender Installation
    Pneumatic rubber fender installation
  • 2024-04-19

    Common Series Standards For Marine Cables
    Marine cables are an important component of ship power systems and various equipment, and the correct selection of suitable marine cables is crucial. It is necessary to comprehensively consider the ship's purpose, cable working environment, cable characteristics, and other aspects, select corresponding ship cables, and pay attention to purchasing precautions to ensure the safe and reliable operation of the ship.
  • 2024-01-18

    MARINE MOORING ROPES CLASSIFICATION
    MARINE MOORING ROPES CLASSIFICATION The materials of marine mooring ropes mainly include polypropylene, polyester, nylon, high molecular weight polyethylene, fiber umbilical cord, etc. 1. Polypropylene material is relatively widely used in China and is a common type of marine rope.2. Polyester mater
  • 2024-01-08

    19-F Bearing Repeater Compass
    The azimuth compass is used to indicate the bow direction of a ship, and the ship's bow direction (bowdirection) referred to here is also known as the heading, which is determined by the electric compass andtransmitted electrically relative to the geographical north direction of the ship's bow and stern line, regardless of the installation location of the electric compass. The direction of the bow and stern lines relative to the geomagnetic north is determined by the magnetic compass and transmitted electrically, regardless of the installation location of the magnetic compass. There are two ways for the 19-F azimuth compass to indicate heading: analog (dial) display and digital display. The lighting brightness of the monitor is adjusted by the buttons on the side of the housing.
  • 2024-01-05

    About Pneumatic Rubber Fenders
    Pneumatic fnders are the most appropriate anti collision device for marine use. They are made of synthetic-cord-reinforced rubber sheet with compressed air inside, at initial pressure of 50kPa or 80kPa, to enable it to float on the water.
  • 2023-12-29

    Price Analysis of China’s Marine Steel Plates in 2024
    The cost of steelmaking has fundamentally increased the price of marine steel plates. From a cost perspective, the prices of raw materials such as iron ore and coke have risen strongly, steel mill production costs are high, and steel plate prices have strong cost support. Since May 2023, the supply
  • Total 36 pages  Go to Page
  • Go

Products

Call Us
+86-756-8301004