LST-WP2 Bitumen Hot Air Welder

LST-WP2 Bitumen Hot Air Welder

Product Introduction

➢ The flameless modified SBS welder uses hot air to realize the welding of modified SBS, which is firm and reliable, and is widely used in non-curing edge banding.

➢ This machine is equipped with a customized and specially developed 80mm wide tuyere. The width of the welding seam can reach 80-100mm during actual welding, which is enough to meet the industry's requirements for the welding width of asphalt materials.

➢ Closed loop control.

This machine can not only display the welding temperature and welding speed, the control system adopts closed-loop control, regardless of the external voltage change, or the welding direction up or down under the change of the external environment, such as negative feedback automatically adjusts the set temperature and speed to make welding The parameters are more stable and the welding quality is more reliable.

Product Parameters

Advantage

1.80mm wide nozzle meets the width required by industry specifications

This machine is equipped with a customized and specially developed 80mm wide tuyere. The width of the welding seam can reach 80-100mm during actual welding, which is enough to meet the industry's requirements for welding width of asphalt materials 

2.Intelligent control system

The single-chip control system is simple and intuitive to operate.

3.High-efficiency welding nozzle

*Anti-scald protection design maximizes heat and air volume.

*The silicone pressure roller and metal pressure roller can be modified according to different SBS, so that the pressure roller and the walking roller are balanced and a good welding seam is maintained. 

4.Precision positioning system

The positioning system ensures that the walking is straight and unbiased.