Heavy Fast Inflatable Marine Natural Rubber Airbag For Ship Launching

Marine rubber Ship Launching / Landing Airbags, basic body are consisted of our rubber layers, synthetic-cord-reinforced rubber layers, are kind of a cylindrical airbags with hemispherical heads at the both ends. All of these are vulcanized together, and then compress air inside to enable it to roll.

1. Outer Rubber

The outer rubber layer protects the cord layers from abrasion and other external forces. This compound has sufficient tensile and tear strength to withstand any weather condition and hard usage. Standard color is black.

2. Synthetic-net-cord layer for reinforcement

The reinforcement cord layers, which are made of Synthetic-tire-cord commonly used in tires, are arranged at ideal angles to hold the internal pressure and to distribute the stress even providing strong efficient reinforcement.

3. End Fittings

End fittings include air tightness swivel and marine natural rubber launching airbag safety air inlet.

Marine Ship Launching Airbag are designed using principle of rolling wood. “Deyuan Marine’’ Inflatable ship rubber airbag choose the whole intertwine technology to make heavy fast Ship Launching Airbag on the structure more reasonable,has higher safety coefficient and bearing capacity.

Inflatable Marine rubber Ship Launching Specification :

Model	Diameter (m)	Initial pressure (KPa)	Rated working pressure, Pe (KPa)	A deformation rate of 70%, internal pressure equivalent to the rated pressure value of Pe, the airbag bearing capacity of the length of each meter. (kN/m)	Minimum burst pressure (KPa)
QP3	0.8	25	130	114	390
	1	18	100	110	300
	1.2	15	85	112	260
	1.5	13	70	115	210
QP4	1.8	35	170	149	510
	1	25	130	143	390
	1.2	20	110	145	330
	1.5	16	90	148	270
	1.8	14	80	158	240
QP5	0.8	48	210	184	630
	1	35	170	186	510
	1.2	28	140	185	420
	1.5	20	110	181	330
	1.8	16	90	178	270
QP6	1	45	200	219	600
	1.2	32	165	217	490
	1.5	25	130	215	390
	1.8	20	110	218	330
Note: Rated working pressure: ±5%. Compress deformation: ±2%.