Angle Coupling Joint Bend 90° Tube Fittings

Angle Coupling Joint Bend 90° Tube Fittings

Extrusion type pipe joint:

1. Extrusion type pipe joint is a positive tube fitting system that consists of just three components . The mechanically reshaped tube end is positively. connected by a conventional DIN fit ting body and a DIN nut, the only possible leakage path being sealed off by an elastomer ring. One characteristic feature of the reshaped tube, which is insert ed into the 24° cone of the body.This results in a marked improvement in assembly behaviour and good protection against excessive tightening

2. Electronically control led machines-both stationary and mobile-guarantee efficient production with consistently high quality.

3. For reshaping steel tubes with outside diameters from 6 to 42mm. and stainless steel tubes with outside diameters from 6 to 42mm (without 38X 6mm).

4. By changing tools,the M-WF385X/B0 machine can also be used as a flaring machine for Eaton’s Walterscheid -37° SAE flared flanges up to 60.3 mm.

We guarantee nominal pressure classes up to 800 bar for WALFORM plus tube fitting components a safety factor of 4 and l 00% stripping resistance as a result of the unique shape.

The individual components of the WALFORM tube fitting comply with DIN EN ISO 8434-1.However,the fitting system can not be viewed in isolation. Consequently, the pressure loading Capacity is always governed by the tube sizes used and their wall thicknesses.

Extrusion type pipe joint nominal pressure levels:

Angle Coupling Joint Bend 90° Tube Fittings:

*Material:C-Carbon steel; P-Stainless steel; T-Brass.

L-Light duty.

S-Heavy duty.