Steel Type Navigation Buoys

Product Description

Steel Type Navigation Buoys


Navigation buoys play an important role in supporting water transportation, fisheries, marine development and national defense construction.


The Maritime Safety Administration exercises unified management and maintenance over coastal navigation marks. Inland navigation marks are constructed, managed and maintained by the waterway management agencies under the traffic management departments.


Navigation buoys are set up in navigable waters and their vicinity to indicate waterways, anchorages, obstructions, shoals, etc., or as positioning and turning marks, etc. Navigation marks are also used to convey signals, such as indicating water depth, predicting wind conditions, and directing traffic in narrow waterways.


The location, characteristics, light quality, and signals of permanent navigation marks are all included in the navigation mark tables and nautical charts published by various countries. Modern navigation buoys are mainly divided into two categories: sea area navigation marks and inland river navigation marks.


1. This design is based on the "Buoy" (JT/T760-2009) of the Ministry of Transport of the People's Republic of China. During the construction of the buoy, the buoy diameter, draft, total height, lamp base height from the waterline, float steel plate thickness, buoy weight, center of gravity, buoy center, and center of gravity should meet the requirements of (JT/T760-2009).


2. The buoy must be made of marine steel plates. The lamp holders of the same type of buoys should be interchangeable. The buoy should be tested for airtightness before painting. The pressure is 0.020MPa, and the pressure is maintained for 10 minutes without any leakage.


3. Use shot blasting or electric light brush to remove rust. After removing welding slag, burrs and rust, the surface of the buoy is painted according to the standard.

SN Module Main Parameter Unit
1 General fixture Diameter mm
2 Buoy body Nominal diameter m
3 Light pile, shore beacon Nominal height m
4 Lantern Nominal diameter m
5 Foghorn Effective range n mile
6 Remote control equipment Effective range km
7 Power source Voltage/Current V/mA
8 Transponder Effective range km



Configuration option list of HF series buoy components:

NO 1 2 3 4 5 6 7 8 9

Top Mark Solar Panels Radar Reflector Day Mark Super Structure Battery Box Rubber Fender Buoy Body Zn Anode
D1/D2 △ △ △ △ ◯ ◯ △ ◯ △
D1A/D2A △ △ △ △ ◯ ◯ △ ◯ △
D1A/D2A △ △ △ △ ◯ ◯ ◯ ◯ ◯


Product Inquiry

Steel Type Mooring Buoys

Plastic Shell Monitoring Buoys

Polymer Buoys

Offshore Anchor Buoy

IALA Maritime Buoyage System

High Quality Grade U1 Stud Link Flash Welding Marine Anchor Chain

Grade AM1 Stud Link Marine Anchor Chain with Good Price

Marine Mooring Grade AM2 Cast Steel Stud Link Ship Anchor Chain

CCS Approved Grade AM3 Marine Stud Link Steel Anchor Chain

Grade 1 Marine Ocean Mooring Open Link Anchor Chain With ABS

ISO Standard Marine Anchor Chain Different Way Connection Link Type

Grade 3 Marine Studless Open Link Anchor Chain For Ship

Φ11~Φ162mm Painted Black Marine Anchor Chain For Ship And Boat

HDG Stud Link Anchor Chain ISO1704 Standard High Strength Anchor Chain with Certificate

Offshore Mooring Grade 3 Studless Anchor Chain Hot Dip Galvanized

Good Price Offshore R4s Steel Marine Stud Link Mooring Anchor Chain

Cast Steel Marine Studless Mooring Anchor Chain with ABS certificate

RQ3 Grade Steel Offshore Industry Used Mooring Stud Link Anchor Chain

ABS Approved R3s Offshore Mooring Cast Steel Anchor Chain

Offshore Marine Black RQ3s Grade Stud Link Mooring Anchor Chain