Marine Natural Rubber Ship Launching Airbags With Different Cord Layers
Product Description
Marine Natural Rubber Ship Launching Airbags With Different Cord Layers
Our marine launching airbags are china independent intellectual property rights of innovative products, the products are mainly applied to ship launching and landing, weight lifting and moving, installation of underwater buoyancy aid for salvage sunken vessels etc. Natural rubber airbags launching technology was developed based on traditional slipway launching mode, it overcomes the restrictions of traditional slipway launching mode. Our marine ship launching airbags are less limited by space, no large mechanical equipment, can shorten the working period and save the unnecessary cost. Through years of development practice, our products are become more safety, effective and green environmental protection and they can launching a ship up to 100,000 DWT.
Normally customer will choose the suitable marine boat launching airbags according the layers of the Marine Air Bags, just give below an example .
4-layer bags that are 1.5m dia x 15m long contain a rubber content that is not less than 51%. The airbags can safely hold 156-tons with a safe working pressure of 0.08MPa while rolling. When standing still the highest lifting pressure is 0.10MPa while holding 194-tons.
6-layer bags that are 1.5m dia x 15m long contain a rubber content that is not less than 51%. The different cord layers launching airbags can safely hold 234-tons with a safe working pressure of 0.12MPa while rolling. When standing still the highest lifting pressure is 0.14MPa while holding 272-tons.
| Model | Diameter (m) | Initial pressure (KPa) | Rated working pressure, Pe (KPa) | A deformation rate of 70%, internal pressure equivalent to the rated pressure value of Pe, the airbag bearing capacity of the length of each meter. (kN/m) | Minimum burst pressure (KPa) |
| QP3 | 0.8 | 25 | 130 | 114 | 390 |
| 1 | 18 | 100 | 110 | 300 | |
| 1.2 | 15 | 85 | 112 | 260 | |
| 1.5 | 13 | 70 | 115 | 210 | |
| QP4 | 1.8 | 35 | 170 | 149 | 510 |
| 1 | 25 | 130 | 143 | 390 | |
| 1.2 | 20 | 110 | 145 | 330 | |
| 1.5 | 16 | 90 | 148 | 270 | |
| 1.8 | 14 | 80 | 158 | 240 | |
| QP5 | 0.8 | 48 | 210 | 184 | 630 |
| 1 | 35 | 170 | 186 | 510 | |
| 1.2 | 28 | 140 | 185 | 420 | |
| 1.5 | 20 | 110 | 181 | 330 | |
| 1.8 | 16 | 90 | 178 | 270 | |
| QP6 | 1 | 45 | 200 | 219 | 600 |
| 1.2 | 32 | 165 | 217 | 490 | |
| 1.5 | 25 | 130 | 215 | 390 | |
| 1.8 | 20 | 110 | 218 | 330 | |
| Note: Rated working pressure: ±5%. Compress deformation: ±2%. | |||||
More ship launching airbags can be offered, pls contact us for more details.