Marine Inflatable Rubber Launching Airbag For Ship
Product Description
Marine Inflatable Rubber Launching Airbag For Ship
Marine Airbag is china independent intellectual property rights of innovative products, the marine lifting airbags are mainly applied to ship launching and landing, weight lifting and moving, installation of underwater buoyancy aid to salvage sunken vessels etc. Rubber Airbag launching technology was developed based on traditional slipway launching mode, Ship Launching Airbag overcomes the restrictions of traditional slipway launching mode. Our Rubber marine lifting airbags are less limited by space, no need large mechanical equipment, Marine Rubber Airbags can shorten the working period and save the unnecessary cost. Through years of development practice, our Marine salvage airbags are become more safe, effective and green environmental protection and they can launching a ship up to 100,000 DWT.
Launching rubber airbag can be widely used to move various large-scale prefabricated reinforced concrete products (such as caissons, box culverts, bridges, etc.), oil drilling equipment, comprehensive buildings, etc.
According to customer requirements for shipwreck salvage and underwater installation operations, corresponding buoyancy can be provided. Various methods can be used to flexibly fill and ship airbag in the construction of wreck salvage pontoon bridge installation, dock construction, and underwater water pipeline installation.
Marine inflatable airbag is widely used in take off and landing of large, medium and small ships, and has the advantages of saving labor, time and capital.
| Excellent performance for airbags | |||||||
| Diameter (m) | Length (m) | Working pressure (Kpa) | Bearing capacity (KN/m) | Length (m) | Diameter (m) | Working pressure (Kpa) | Bearing capacity (KN/m) |
| 0.8 | 1 | 260 | 229 | 1.5 | 1 | 150 | 247 |
| 2 | 280 | 246 | 2 | 170 | 280 | ||
| 3 | 300 | 364 | 3 | 190 | 313 | ||
| 4 | 320 | 281 | 4 | 210 | 346 | ||
| 5 | 340 | 299 | 5 | 230 | 379 | ||
| 6 | 360 | 317 | 6 | 250 | 412 | ||
| 1 | 1 | 220 | 242 | 1.8 | 1 | 130 | 257 |
| 2 | 240 | 264 | 2 | 150 | 297 | ||
| 3 | 260 | 386 | 3 | 170 | 336 | ||
| 4 | 280 | 308 | 4 | 190 | 376 | ||
| 5 | 300 | 330 | 5 | 210 | 416 | ||
| 6 | 320 | 352 | 6 | 230 | 455 | ||
| 1.2 | 1 | 180 | 238 | 2 | 1 | 110 | 242 |
| 2 | 200 | 264 | 2 | 130 | 286 | ||
| 3 | 220 | 290 | 3 | 150 | 330 | ||
| 4 | 240 | 317 | 4 | 170 | 374 | ||
| 5 | 260 | 343 | 5 | 190 | 418 | ||
| 6 | 280 | 369 | 6 | 210 | 426 | ||
| Note: When compress deformation is 70%, the inner pressure equals the rated working pressure. | |||||||