Bilgmon 488 15ppm Bilge Alarm for OWS

Product Description

Bilgmon 488 15ppm Bilge Alarm for OWS

The BilgMon488 bilge alarm has been designed specifically for use in conjunction with15 ppm oil-water separator units. BilgMon488 performance meets the requirements of the International Maritime Organisation specifications for 15 ppm bilge alarms contained in resolution MEPC. 107(49).

BilgMon488 bilge alarm is equipped with 2 adjustable alarms that are triggered when the oil-content of the processed sample exceeds the set limit (1 – 15 ppm, works-adjusted to 15ppm).Alarm outputs consist of relays and indicator LEDs. Additionally a 0(4) – 20 mA current output signal (corresponding to 0 – 30 ppm) is available to enable remote surveillance and recording of oil contents.

Measurement:

1. Oil range: 0 – 30 ppm

2. Resolution: 0.1 ppm

3. Accuracy: According to IMO MEPC.107(49)

4. Response time: < 3 sec

5. Alarms:

*Alarm 1 (valve control) delay: 0-10 sec user adjustable

*Alarm 2 (annunciation) delay: 0-600 sec user adjustable

*Alarm points 1 and 2: 1-15 ppm user adjustable

*Alarm hysteresis: 0.5 ppm (below alarm point)

6. Data storage and retrieval:

*Calibration storage: Stored in sensor housing.

*IMO required data: Stored in BilgMon488 main housing (sensor housing may be replaced with data remaining on board).

*IMO required data retrieval: Via LCD display, RS232 or removable memory.

7. User interface:

*LCD display: 2x16 alphanumeric display

*Control: 4 button keypad

Reference Drawing:

Deyuan Marine provides one-stop sourcing services and offers tailor-made products on request.

Bilgmon 488 15ppm Bilge Alarm for OWS

Product Description

Related Products