OMD-2005 15ppm Bilge Alarm
Product Description
OMD-2005 15ppm Bilge Alarm
OMD-2005 15ppm Bilge Alarm according to IMO Resolution MEPC.107 (49). All monitors in our range are inspected and tested to the related I.M.O. requirements at ou r factories prior to delivery.
In normal use the units should operate correctly and without fault over a long period of time requiring only small amounts of
maintenance to be carried out as outlined in the instruction manuals.
maintenance to be carried out as outlined in the instruction manuals.
| Range (measurement & indication) | 0 - 30 ppm, Trend up to 50ppm |
| Range (IMO specification) | 0 - 15 ppm (according IMO regulations) |
| Accuracy | better than IMO MEPC.107(49) |
| Electrical power supply | 24V - 240V, AC or DC, automatic voltage adjustment |
| Electrical power consumption | < 15 VA |
| Sample | Oily water from separator outlet, 0,1 - 4 l/min |
| Sample temperature range | +1°C to +65°C |
| Sample connections | R 1/4" Female |
| Alarm 1 & 2 Set Points | 1 - 15ppm (independently adjustable) |
| Alarm 1 operating delay for annunciation | 1 - 540 sec |
| Alarm 2 operating delay for control | 1 - 10 sec |
| Alarm contacts | 2 independently adjustable switchover contacts |
| Alarm contact operation mode | De-energized in Alarm State |
| Alarm contact ratings | 3A, 240V each |
| Alarm output | 0 - 20 mA or 4 - 20 mA, for 0-30ppm reversible, ext. Load<150Ω |
| Display | Green Graphic Display |
| Ambient temperature | +1°C to +55°C |
| Class of protection | IP 65 |
| Dimensions | 360 x 240 x 100 mm (WxHxD) |
| Weight | 7,3 kgs |