Pilot Ladder Hull Fixed Magnets 300KG

Pilot Ladder Hull Fixed Magnets 300KG

This orange pilot ladder magnets consists of three flat countersunk pot magnets,steel plate body,a Polymer plastic handle and a rubber roller,with accessories of sling belt and packing case.

When the pilot ladder working, two units fixed magnets will be put and fixed on the hull, for both sides of pilot ladder. As long as the magnets settled down, an extra sling belt with stainless steel karabiner will be used to fasten the pilot ladder to magnetic assembly. In this way, it can prevent the ladder from shaking side to side to protect the life safety of the valued pilot. After using, it’s easy to retrieve the magnets by lifting the polymer plastic handle.

Features:

Super strong magnetic force, light weight, strong adsorption, etc. by a strong magnetic force can be firmly adsorbed on the rough hull, stainless steel ring for connecting fixed rope.

The Polymer plastic are certified by CCS with Proof load of 300KG.

Hull magnets are easy to operate devices and when positioned correctly, provide substantial holding force. The handle of the magnet is also a lever and enables easy release from the hull of the vessel. The intended proper use of the magnets is shown in the image below.

Both Arrangement Form A and Form B are applicable.

About Modifications:

Some companies mentioned modifications made to these pilot ladder magnets have resulted in incidents and listed many cases without any specific event.

Obviously, the conclusion is correct, Modifications shall not happen to pilot ladder magnets, but who will really do this? Who will? We doubt some companies were just doing panic marketing.