Engine Hydraulic Anchor Handling Heavy Duty Towing Winch
Anchor handling winch and Anchor winch are the professional winches installed on vessel/ship deck for anchoring when vessel/ship need to stop at anchorage ground. Anchor handling winch is a necessity for all vessels and boats. It’s power supply can be manpower, electric motor, diesel engine or hydraulic power pack etc. Dia. of anchor chain from φ12.5 to φ162mm, Working speed around 10 m/min.
Configuration of the anchor handling winch normally be designed with single drum or double drum(waterfall type), as it be designed with drum instead of gypsy wheel, so the steel wire ropes will instead of the anchor chains, but there’s still 1 length (27.5m anchor chain) reserved to be connect both anchor and wire rope. Also a warping end is optional too if necessary. Based on different requirement, we manufacture these winches with local control or c/w remote control too.
The waterfall type winch with two drums, has both functions of anchor handling and towing, also the configuration of drum could be placed in side by side mode.
For heavy duty case like single point mooring or multi point mooring, the winch has huge pulling capacity.
Heavy Duty Anchor Handling/Towing Winch
a)Duty pull: from 40T to 300T
|Drive||Electric hydraulic/engine hydraulic|
|Type||Double drum waterfall configuratoin|
|Drum brake load||600KN~4500KN|
|Dynamic braking||50~100KN *50~100M/MIN|
|Clutch||Hydraulic operated jaw type|
|Brake||Spring loaded hydraulic release|
|Control||Local control& remote control in wheel house|
|Option||Length &tension monitoring system|
|Stainless steel lined on drum brake band|
More anchor handling towing winch can be offered,pls contact us for more details.