WS-6 Marine Wash & Store

WS-6 Marine Wash & Store

Product Introduction:

The WS-6 is a high‑performance, pass‑through warewasher engineered specifically for marine and high‑volume commercial kitchens. Combining powerful cleaning, thermal disinfection, and integrated rack storage in a single stainless‑steel unit, it delivers exceptional hygiene, operational efficiency, and space savings – ideal for ship galleys, offshore platforms, cruise liners, and large catering facilities where cleanliness and reliability are paramount.

Marine‑Grade Stainless Steel Construction:

1.Full food‑grade SUS304 stainless steel – interior and exterior are built from premium 304 stainless, offering outstanding corrosion resistance against salt spray, humidity, and aggressive detergents.

2.Reinforced, vibration‑resistant frame – heavy‑duty mounts and locking feet ensure stability even in rough seas, preventing movement and maintaining door seal integrity.

3.Sanitary design – smooth surfaces, rounded corners, and sloped drains minimise water pooling and bacterial growth, simplifying cleaning and meeting HACCP requirements.

Technical Specifications:

Versatile Washing Programs – 8 Cycles for Every Load:

The WS‑6 offers a comprehensive selection of 8 washing cycles, including primary and auxiliary programs:

*Cycles: eight ;

*Washing: GLASSES, STANDARD, INTENSIVE, HOT DISINFECTION, HEATING;

*Auxiliary: SELF-CLEAING

Flexible & Fast – Programmable Wash Times:

1.Adjustable cycle duration – STANDARD mode can be set from 20 to 60 minutes (factory default: 45 min).

2.Total cycle time (including heat‑up preparation) – approximately 60 to 90 minutes, depending on incoming water temperature.

3.Rapid heat‑up system ensures minimal wait time between loads – critical for busy meal services onboard.

Intelligent Operation & Real‑Time Monitoring:

1.Large high‑definition display – shows real‑time operating status, including cycle phase, temperature, and remaining time.

2.Fault diagnosis & alarm system – audible and visual warnings alert crew to abnormal conditions (e.g., low water, heater failure, door ajar), enabling rapid troubleshooting and reducing downtime.

3.Parameterised settings – operators can adjust wash temperature, rinse duration, and drying parameters to suit different soil levels and tableware types.

Integrated Rack Storage – Space‑Saving Efficiency:

*8 washing racks (490 × 515 mm) are supplied as standard, with dedicated storage positions within the unit – eliminating the need for separate drying/storage furniture.

*Pass‑through design – load from one side, unload from the other, supporting continuous workflow in confined galleys.

*Rack compatibility – standard GN 1/1 and gastronorm sizes fit seamlessly.

Marine‑Specific Design Features:

1.Secure door interlock – prevents opening during high‑temperature cycles, protecting operators from steam and splash.

2.Integrated drainage system – DN32 hose outlet with anti‑siphon protection, ensuring rapid waste water evacuation even when vessel is pitching.

3.Stable water supply compatibility – accepts inlet pressure of 0.2 – 0.4 MPa (G1/2 external thread), with built‑in pressure regulation for fluctuating shipboard water systems.

4.Energy‑efficient operation – rated at only 7 kW, balancing powerful cleaning with moderate power draw – critical on vessels with limited generator capacity.

5.Easy maintenance access – front‑serviceable pumps, heaters, and filters, reducing repair time and costs.