Stainless Steel Marine 35KN Inflatable Liferaft Automatic Release Hook

Stainless Steel Marine 35KN Inflatable Liferaft Automatic Release Hook

Automatic Release Hook is one of the helpful equipment for our liferaft when we release it .But many persons don't know how to use the Liferaft Automatic Release Hook correctly .Now we introduce the operation Instruction of Inflatable Liferaft Release Hook. Hope Marine Inflatable Liferaft Release Hook usage point can help you .

1.Hoist hanging Marine Liferaft Automatic Release Hook: Take out the pin ,pull the hook ,Iet Spring housing and handle get to "hook" position .Hoist the life when hook locked.

2.Hoist Automatic Release Hook: When hook is loaded, pull the handle of spring housing with pin to "releasa" position, When hook is nonleaded, handle of spring housing can automatically reach the " releasing hook "position, then the life raft releases the hook.

Checking list of the Marine Automatic Release Hook

1.The junction between Stainless Steel Release Hook and pin shaft should be flexible.

2.Positions on the Stainless Steel Automatic Release Hook operating handle(hitching, releasing ,discharging)should be exact and flexible.

3.The junction between roller and pin shaft should be flexible.

Maintaining and repairing of Stainless Steel Liferaft Release Hook:After being used, the 35KN Liferaft Automatic Release Hook should be checked periodically, all the moving parts .Should always being filled with enough grease: since some parts wore ,bent ,or the contractility of spring cannot meet the requirement .the releasing motion not flexible or being locked deadly, then these relating parts should be changed .Periodical maintaining plan of Stainless Steel Marine 35KN Inflatable Liferaft Automatic Release Hook.

The release hook must be checked every three months to ensue it's flexible and not being locked,so that it can be released smoothly when working.

Below is the data sheet of 35KN Automatic Release Hook for your information