RS020 Small Size Rotomolding Airdrop Case

RS020 Small Size Rotomolding Airdrop Case

RS020 is a series of rotomolded airdrop boxes for military protection boxes. For rotomolding process, there is no sponge as standard, and pre-cut sponges, customized sponges, etc. can be configured separately.

Feature

- Meet military standards

- Airdrop height 15 meters

- Stackable

- Rubber sealed loop

- Sturdy long shaft

Testing report:

1. MIL-STD-810F 512.4 (Federal Test Standard Water Immersion Test)

2. MIL-STD-810F 514.5 (U.S. Federal Test Method Vibration Test Standard)

3. FED-STD-101C (U.S. Federal Test Method Low Temperature Drop Standard)

4. ATA300 (Air Transport Association standard drop hammer impact)

5. ASTMIP65 (IP waterproof and dustproof protection level)

6. ASTMB4169.DC-18 (American Society for Testing and Materials rain test)

7. STANAG4280 (NATO waterproof and moisture-proof standard agreement)

IP protection level test:

ASTM IP65 (IP waterproof and dustproof protection level)

Dust spraying No dust ingress; box immersed in water, no water infiltration within the standard water pressure time

Low temperature drop test:

FED-STD-101C (U.S. federal test method low temperature drop standard)

The box is equipped with 14KG weight, 0.64m height, free fall 26 times in all directions on the angular surface

Vibration/rain test:

ASTMB4169, DC-18 (US federal test method vibration test standard)

Violent vibration at 5-50 Hz for 120 minutes, 3 axes, 40 minutes per axis, rainfall 100mm per hour, 40 minutes of rain on 6 surfaces

Drop hammer impact test:

ATA300 (Air Transport Association standard drop hammer impact)

3.2cm in diameter, hemispherical top, 6KG in weight, 0.5m high impact

National military standard: GJB150A-2009 GJB2711-1996

Data Sheet