Marine Mushroom Ventilators for Axial Fan Type C CB/T 295-2000 and CB/T 4444-2017

Marine Mushroom Ventilators for Axial Fan Type C CB/T 295-2000 and CB/T 4444-2017

Mushroom Ventilator is installed on deck for natural ventilation or mechanical ventilation devices .

CB/T295 Mushroom Ventilation is generally used for kitchen and accommodation of ventilator regulating screw, simply turn adjusting handwheel indoors can reach the purpose of adjusting the opening size.

CB/T 4444-2017 is a new edition of CB/T 295-2000, main difference of them are weight of each model.

Process requirements

1. Surface: should be flat and smooth, without sharp edges, distortion, or skew.

2. Size error:  ±3mm, and the deviation of the verticality is 2/h1000 (h is the height of the ventilator cylinder)

3. The welding surface: free of cracks, slag inclusions, burn-through, and unfused defects.

4. The opening of the weather-tight cover of the fungus-shaped ventilator for ships should be flexible, and the movable part should be coated with neutral lubricating grease.

5. Derusting: the internal and external surfaces of the steel parts of the fungus-shaped ventilating cap should reach the Sa2 level or St2 level specified in GB/T8923, and then two antirust primers.

Fig.1 CB/T 295-2000 Type C

Fig.2 CB/T 4444-2017 Type C

Note: the height of air pipe is decided by customer.

Obviously, type C mushroom ventilator's opening & closing is operating from top outside and will be installed above an axial fan(flange matched).

Type C CB/T 295-2000 Models:

Type C CB/T 4444-2017 Models:

For more types and models of marine ventilators, pls do not hesitate to contact us in any way.