Do You Know About Aluminum Honeycomb Panel For Ship?

Do you know about Aluminum Honeycomb panel?

Aluminum honeycomb panel, suitable for civil building, vehicle and ship decoration. It is the application of aviation and aerospace materials in the field of civil construction. The whole process is completed in the modern factory, using the hot pressing molding technology, because of the high heat conduction value between the aluminum skin and honeycomb, the internal and external aluminum skin expansion and cold shrinkage synchronization; There are holes in the honeycomb aluminum skin, so that the gas in the plate can flow freely; Sliding mounting buckle system will not cause structural deformation when expanding in heat and shrinking in cold.

The core material is hexagonal 3003 aluminum honeycomb core, the thickness of aluminum foil is 0.04~0.06mm, and the side length is 5~6mm. Roller forming technology is adopted to complete the shaping of the front and back surfaces. The whole process is completed in the modern factory, using the hot pressing molding technology, because of the high heat conduction value between the aluminum skin and honeycomb, the internal and external aluminum skin expansion and cold shrinkage synchronization; There are holes in the honeycomb aluminum skin, so that the gas in the plate can flow freely; The sliding mounting buckle system will not cause the structural deformation when the heat expands and the cold shrinks, so it can guarantee the extremely high flatness. The inner layer is a special hexagonal aluminum honeycomb made of aluminum alloy with a hardness up to H19, which acts as a core board adhered to the sandwich structure and is subjected to pressure in the cutting direction. The dense honeycomb that these mutual contain resembles a lot of small I word beam, can bear the pressure that comes from face plate direction dispersedly, make plate bear force even, ensured face plate is in larger area when still can maintain very high flatness.

As we all know, the noise is particularly large when rainning on the aluminum veneer or aluminum plastic plate , but honeycomb panel donot have noise. Aluminum honeycomb plate is generally made of fluorocarbon rolled aluminum plate. The most important point of fluorocarbon rolling aluminum plate is the use of continuous roller coating process, aluminum plate coating is completed in one time, to ensure that the product color, coating smooth, reliable quality. At the same time, it can keep the color of the exterior wall of the building bright for a long time. After a long period of exposure to the sun and rain or industrial waste gas pollution, it is obvious that the rolling coating board is cleaner and brighter than the spraying board, and has good adhesion and weather resistance, is the world's recognized first-class construction materials.

It is mostly used in below field:

(1) hanging panels for building curtain walls

(2) interior decoration project

(3) billboards

(4) ship construction

(5) aviation industry

(6) indoor partition and commodity display desk

(7) body of commercial transport vehicle and container vehicle

(8) buses, trains, subways and rail transit vehicles

There are many advantages about honeycomb panel: 

1. Formaldehyde-Free & Environmental

2.Fireproof and Damp-proof

3.Light Weight & Shock Resistant

4.Scratch Resistant

5.Odorless and InstantUsage

6.No Crack during Cutting 

7.Super Flat Surface, No Bubbles & No Waves

8.Not Required for More Treatments, so save Time for installation

If you need more details about this product , pls feel free to let me know .