10'/20' Horizontal/Vertical Type Offshore Tank Container

10'/20' Horizontal/Vertical Type Offshore Tank Container

With the rapid development of marine engineering, offshore containers as supporting equipment have also developed rapidly, and offshore containers have gradually evolved from standard containers.

Offshore containers are mainly used for the transportation of goods or equipment between fixed or floating facilities at sea and ships. The sea environment is often windy and rough, and there is no professional port crane facility. Therefore, it is easy to cause collisions between the container, the floating facilities and the hull during the hoisting process. If a standard container is used, the box body may be damaged.

Offshore containers are only suitable for the global offshore industry, and there are no strict standards for their dimensions and functions. The box structure and box type are mainly designed according to the purpose. The box structure can be divided into main structure and secondary structure according to its function. The main structure plays the main bearing and supporting role, which can be subdivided into key main structures and non-key main structures: key main structures include top and bottom side beams, end top beams, end bottom beams, corner columns, fork grooves and lifting lugs, etc. It transfers the load generated by the loaded goods to the hook or forklift.

When designing offshore container structures, the following requirements should also be met:

(1) Fully consider the local impact load caused by the impact of the box on the adjacent box or the rigid part of the hull during the hoisting process.

(2) When arranging the main structure, the effective continuity of the structure should be ensured; the intersection distance between beams (columns) should be as far as possible, and effective measures should be taken to reduce the stress concentration of the web or flange.

(3) The box body should have the adaptability to tilt in any direction)

(4) Reasonably set up the box door, handle, box cover lug, etc., and take corresponding protective measures to prevent them from hanging on the hook of the lifting equipment.

Technical Specifications